A simple splint

To THE EDITOR:

Inderjeet Kaur, M.D., M.N.A.M.S.The unit supports downdraft, plenum or twin flexi-arm fume removal. It uses a patented mechanism to select the best of the three extraction options depending on the job being performed.Bhushan Kumar, M.D., N.M.A.M.S.All the soldering irons have positive temperature coefficient heating elements, and can operate for short periods at three times the power of the control unit.When a wider extraction area is needed, the plenum option takes fumes back through the rear hood.1. DALAL, M., KARMARKAR, S. M., YADAV, P. and NEHETE, R. A simple method to prepare a custom-made finger splint using a disposable hypodermic syringe. Plast. Reconstr. Surg. 99 (1997) 2102-2103.Professor and HeadIn adhesive-intensive operations, for example, the downdraft position will draw fumes down through a conductive foamwork pad. For general soldering, the two 50mm flexi-arms can be used, operating either side of the work piece or with one over the work piece and one over the soldering iron stand to capture stray fumes.Postgraduate Institute of Medical Research and EducationCopyright: United Business Media International Ltd.-Ranju Rai, M.D.Department of Dermatology, Venereology and Leprology

Reprint requests to Dr. Kumar at the above address or Fax 91-0172-744401; email: kumarbhushan@hotmail.com

Author: Rai, Ranju, Kaur, Inderjeet, Kumar, Bhushan